ANSI A (), Standard for Accessible and Usable Buildings and Facilities as mandated by law and incorporated by reference by the States and. the laws that are enacted in the United States of America and in the states and cities contained therein. ±. «ANSI A (), Standard for Accessible and. Major changes/additions from ICC ANSI A – found in the edition of A 1. ICC ANSI. A – Section. ICC ANSI A –
|Published (Last):||20 September 2013|
|PDF File Size:||5.2 Mb|
|ePub File Size:||15.95 Mb|
|Price:||Free* [*Free Regsitration Required]|
Full text of “ANSI A (): Accessible and Usable Buildings and Facilities”
In alternate roll-in showers anso the controls and hand shower located on the back wall opposite the annsi, the controls and hand shower shall be located within 15 inches mmleft or right, of the centerline of the seat. Visual characters shall be 40 inches mm minimum above the floor of the viewing position, measured to the baseline of the character.
The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he or she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not con- forming to the standards.
Com- partments containing more than one plumbing fix- ture shall comply with Section Each car shall be equipped with a self-leveling feature that will automatically bring arid maintain the car at landings within a tolerance of V 2 inch 13 mm under rated load- ing to zero loading conditions. The restriction on objects beneath call buttons shall not apply to existing call buttons.
Nosings that project beyond risers shall have the underside of the leading edge curved or bev- eled. Unless otherwise specified, doors shall be permitted to swing into turning spaces. Viewing distance shall be measured as the horizontal distance between the character and an obstruction pre- venting further approach towards the sign.
The meaning of terms not specifically defined in this standard or in a refer- enced standard shall be as defined by collegiate dictionaries in the sense that the context implies. Characters shall be uppercase.
Thresholds and changes in level at doorways shall comply with Section.
In Type A and Type B units, the vertical grab bar component is not required. For Braille mounting height see Section The uppercase letter “I” of the font shall be used to ansu the allowable stroke width of all char- acters a117.12-003 a font.
The call button that des- ignates the up direction shall be located above the call button that designates the down direc- tion. Access aisles shall be at the same level as the vehicle pull-up space they serve.
2003 ICC Accessible and Usable Buildings and Facilities
Substantial agreement means much more than a simple majority, but not necessarily unanim- ity. If the document w117.1-2003 revised or amended, you will be notified by email. Doors shall be located in the front partition or in the side wall or partition farthest from the water closet. The standards listed in Section Controls shall be located within a117.1-2003 of the reach ranges specified in Section Grab bars, and any wall or other surfaces adjacent to grab bars, shall be free of sharp or abrasive elements.
Table of Contents | ICC/ANSI A – | ICC premiumACCESS
Signs identifying van parking spaces shall contain the designation “van accessible. Grab bars for water closets shall comply with Section Elevator car controls shall comply with Sections Vehicle pull-up spaces, access aisles serving them, and a a117.12-003 xnsi from an entrance to the passenger loading zone, and from the passenger loading zone to a vehicular exit serving them, shall provide a vertical clearance of inches mm minimum.
Dispens- ers shall not be of a type that control delivery, or do not allow continuous paper flow. The requirement for the frequency and range of audible signals shall not apply in existing elevators.
ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities
Door closers and door stops shall be permitted to be 78 inches mm minimum above the floor. Where knee clear- ance is required beneath an element as ansii of a clear floor space, the knee clearance shall be 1 1 a Forward Approach b Parallel Approach Fig.
a117.1-0203 Where speech synthesis cannot be sup- ported, dynamic alphabetic output shall not be required to be audible. The space between the wall and the grab bar shall be 1 V 2 inches 38 mm. A clearance around a water closet 60 inches mm minimum, measured per- pendicular from the sidewall, and 56 inches mm minimum, measured perpendicular from the rear wall, shall be provided.
Building Blocks Chapter 3. Seats shall comply with Section Where access aisles or parking spaces are not adjacent to another access aisle or parking space, measurements shall be permitted to include the full width of the line defining the access aisle or parking space. Ignorance of the law shall not excuse noncompliance and it is the responsibility of the citizens to inform andi as to the laws that are enacted ansl the United States of America and in the states and cities contained therein.