SAE J Very similar to ISO , this standard “defines methods and apparatus to evaluate electronic devices for immunity to potential interference. SAE J Virtually identical to ISO , this standard serves as a ” common basis for the evaluation of devices and equipment in vehicles against. tests based on the client’s needs. EMC Testing: • SAE J Conducted Immunity (BCI). • SAE J Immunity to Conducted Transients on Power Leads.
|Published (Last):||9 December 2011|
|PDF File Size:||18.27 Mb|
|ePub File Size:||5.29 Mb|
|Price:||Free* [*Free Regsitration Required]|
All modules can be used as stand-alone units. Accessories Frankonia provides also many different coils and loop sensor which are ideally suited for sae j1113 described tests.
A calibration mode is included in the software to complement the magnetic test system with any further equipment. Sae j1113 tests with fixed frequencies and test levels or use the ramp function to sweep from start to stop level. Powerful but easy to operate software, ssae expandable for future standards modifications. Sae j1113 test according sae j1113 predefined standards. Open the Magnetic field measurement window for spectrum analyzer measurements.
SAE J / – Frankonia Group
Standard software allows easy operation, report sae j1113 and integration of external measuring instrument for EUT monitoring. Helmholtz Sae j1113 Several Helmholtz coils are available for susceptibility tests. Tests and measurements are controlled by a program which will set most parameter automatically.
Short term generation window for short term magnetic field tests optional.
This window allows basic settings sae j1113 generator and amplifier. Load, save and print data. The required loop sensors for measuring emission can also be ordered. High performance is guaranteed sae j1113 a self-calibration. Magnetic field continuous generation window. Due to the triaxial setup of our Helmholtz coil major improvement in device handling j111 achieved because there is no need to turn an EUT during tests.
Even alternating fields up to kHz can be generated by the sae j1113 test system. Adaptation of signal strength or measurement graphs are sae j1113 at any stage. Sae j1113 instruments may as well be used j11113 stand-alone devices. Using the coupling transformer without this amplifier can destroy any measurement instrument due to overvoltage.
The MTS is a compact test system for broadband generation and measurement of magnetic fields. Frequency range for emission and immunity sae j1113 Components MTS consists of 3 independent modules: Verify the generated field of any radiating coil with loop sensor. Large variety of extensive accessories available. Further features and possibilities.
Prepared for connection of external multimeter for EUT control. Perform sae j1113 single or continuous measurement. Open the Magnetic field generation window for susceptibility tests according to predefined standards. Low Frequency emission and immunity tests acc. User defined signals complement the usage for fast and reliable tests.
Its internal components allow automatic EMC tests according to automotive standards where high field strength need sae j1113 be generated or measured. Automotive Testing Intensive testing is required for new products which should sae j1113 used in sae j1113 automotive application.
AD converter Resolution 16 Bit Sampling rate 1. Software Any function sae j1113 controlled via a software which also guide the user through any test or measurement. Lower field sae j1113 can be generated for frequencies up to kHz. We also offer tri-axial Helmholtz coils which are sae j1113 for MTS For any relevant standard, which are fulfilled by the MTS, limit values are already included into the software package, although any different value can be defined by a user.
Due to direct coupling to voltage mains, the coupling transormer has an additional differential amplifier for common mode rejection of the AC mains. Not only our own equipment can be used with the MTS, but also user defined coils.
Any voltage signal or voltage measurement device is calibrated at a self-calibration process automatically in about a minute. After every test full reports will be created automatically.
Frankonia has developed a coupling transformer which meets all requirements. Report layout is pre-defined, though any user-defined layout is possible. Determine the coil factor of an unknown coil.
Individual software modules sae j1113 hardware accessories are available for each of these tests. Edit a predefined standard or create a new one. Sae j1113 the continuous generation window for long term magnetic field test.
Software controlled generation of magnetic field in x- y- and z- direction; no need to turn the EUT! The MTS allows fast and easy testing according to many automotive standards as sae j1113 before. Any additional equipment is ready to sae j1113 j1131 a need for recalibration.